Deprecated: Array and string offset access syntax with curly braces is deprecated in /home/u0886750/mega-therm.com/_class/fonksiyon.php(1) : eval()'d code on line 618 Natural gas pipes
USA & S. America +1 305 307 8483 EU& Middle East: +90 212 401 4155
Telefon
WhatsApp
USA & S. America +1 305 307 8483 EU& Middle East: +90 212 401 4155
MEGA-THERM PE80 NATURAL GAS PIPE
Natural Gas Pipes are produced with PE 80 class raw material. For this, worldwide-proven largest raw material companies. MEGA-THERM PE 80 Natural Gas Pipes are produced in Ø 20-630 mm diameter ranges and SDR 11 and SDR 17,6 dimensional ratios. Fittings are only produced in SDR dimensional ratios with PE 100 raw material.
Also undertaking the responsibility of producing Electrofusion fittings for System Integrity, Fırat produces fittings at high safety levels with robotic full automated efimatic system. Fittings are offered to the market upon having them produced under 100% control with Efimatic System.
MEGA-THERM PE 80 pipes are produced from high density polyethylene pressure pipe applications, which is one of PE80 yellow. PE80 natural gas for homes and businesses used since 1960 in high pressure and shock-resistant and chemical-resistant because it can be used safely Long lasting and high performance across the globe due to having 95% Pe80 gas pipes are manufactured from polyethylene. PE80 pipes are vital and require a very fine work advanced technology and human life should not be a mistake to not at the risk of being a tube. Long lasting and high performance across the globe due to having 95% Pe80 gas pipes are manufactured from polyethylene.
pipes-gas
Represent a high impact resistance even at low temperatures, so a lot of the polyethylene and, consequently, provides a very important resource such as natural gas in the distribution of its widespread use. Polyethylene gas pipes 10827 TS, ISO 4437 and pipe produced in accordance with production standards and the most suitable range 1555- Ø25-500 mm. PE80 pipes used in Europe for many years for information.
MEGA-THERM PE80 PIPES TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
UNIT
VALUE
TEST METHOD
Density(23 OC)
g/cm3
0,940-0,945
ISO 1183
Melting rate (MFR)190 oC-2,16 Kg
g/10 dk
0,1-0,2
ISO 1133
Melting rate(MFR)190 oC-5,0 Kg
g/10 dk
0,3-0,8
ISO 1133
Elongation At Rupture
%
>600
ISO 527-2/1B/50,TS 1398
Tensile Strength In The Flow
MPa
20-22
ISO 527-2/1B/50,TS 1398
Elasticity Modulus
MPa
700-1000
ISO 527-2/1B/50,TS 1398
The Amount Of Carbon Black (190 oC-5,0Kg)
%
>2
ISO 6964
Hardness
Shore D
40
ISO 868
Thermal Resistence
Dk
>20
EN 728, ISO/TR 10837
Vicat Softening Temperature
OC
125
ISO 306(METOD A)
Brittleness Temperature
OC
<-70
ASTM D-746
Thermal Conductivity (20 OC)
W/mK
0,4
DIN 52612
Thermal conductivity (150 OC)
W/mK
0,2
DIN 52612
ESRC (50 OC’de),F 50
Hour
>5000
ASTM D-1693
PE80 Pipe Technical Values
THE ADVANTAGES OF MEGA-THERM PE80 GAS PIPES
- Demonstrates high strength.
- Shock resistance at a high level.
- Elastic due to the nature is not affected by the earthquake.
Temperatures -40 °C also retains when it drops to the elastic properties.
- The fluid inside and outside the structure of the soil due to corrosion.
- Resistant to abrasion.
- Repairs can be made to suppress the flow of gas in the pipes.
- Coil windings in the pipes through, the more resource points . For this reason, the connection is down to a minimize the risk of the region.
- Merge with no gas for the welding operation is executed EF method does not leak.
- Assembly process is easy.
- High-density polyethylene due to be manufactured from long-lasting use, there is no guarantee.
Mega-Therm Natural Gas Pipes Pressure-Temperature Lifetime Table
SDR
41 26 22 17 13,6 11 9 7,4 6
BORU SERİSİ S
SICAKLIK
20 12,5 10,5 8 6,3 5 4 3,2 2,5
(oC)
İŞLETME SÜRESİ
PN
(YIL)
3,2 5 6 8 10 12,5 16 20 25
ÇALIŞMA BASINCI (BAR)
10 5 4 6,3 7,5 10,1 12,6 15,8 20,2 25,3 31,6
10 3,9 6,2 7,4 9,9 12,4 15,5 19,8 24,8 31
25 3,8 6 7,2 9,7 12,1 15,1 19,4 24,2 30,3
50 3,8 5,9 7,1 9,5 11,9 14,8 19 23,8 29,7
100 3,7 5,8 7 9,3 11,6 14,6 18,7 23,3 29,2
20 5 3,4 5,3 6,3 8,5 10,6 13,2 17 21,2 26,5
10 3,3 5,2 6,2 8,3 10,4 13 16,7 20,8 26
25 3,2 5 6,1 8,1 10,1 12,7 16,2 20,3 25,4
50 3,2 5 6 8 10 12,5 16 20 25
100 3,1 4,9 5,8 7,8 9,8 12,2 15,7 19,6 24,5
30 5 2,8 4,5 5,4 7,2 9 11,2 14,4 18 22,5
10 2,8 4,4 5,3 7 8,8 11 14,1 17,7 22,1
25 2,7 4,3 5,1 6,9 8,6 10,8 13,8 17,3 21,6
50 2,7 4,2 5 6,7 8,4 10,6 13,5 16,9 21,2
40 5 2,4 3,8 4,6 6,2 7,7 9,6 12,4 15,5 19,3
10 2,4 3,8 4,5 6 7,6 9,5 12,1 15,2 19
25 2,3 3,7 4,4 5,9 7,4 9,2 11,8 14,8 18,5
50 2,3 3,6 4,3 5,8 7,2 9,1 11,6 14,5 18,2
50 5 2,1 3,3 4 5,3 6,7 8,4 10,7 13,4 16,8
10 2 3,2 3,8 5,1 6,4 8,1 10,3 12,9 16,2
15 1,8 2,8 3,4 4,5 5,7 7,1 9,1 11,4 14,3
60 5 1,4 2,2 2,7 3,6 4,5 5,6 7,2 9 11,3
70 2 1,1 1,7 2 2,7 3,4 4,3 5,5 6,9 8,7
Method of Joining Mega-Therm PE80 PIPE
Just elektrofuzyon rallies combined with natural gas pipes. Because the source region is very wide in terms of safety, this method was selected.
Mega-Therm Electrofusion
Merge elektrofuzyon welding machine made with this method, the parts located in the copper wire is melted by heating Fusion is performed by applying electricity to a certain part.
Electrofusion of the area to be welded by the welding method must be protected from adverse weather conditions.
Electrofusion should be performed to be welded by the welding method of the environment Temperature: 5°-50°. should be between.
Electrofusion DVS 2207 welding in accordance with the standard method are carried out.
Electrofusion Steps That Must Be Followed:
Before the welding operation is performed, the pipe with its axis at right angles of his mouth should be checked whether they do. If they are not perpendicular with its axis making a right angle and should be discontinued if the mouth should be.
• Manson electrofusion the surface of the pipe to be installed should be marked. Generally, the length should be half the length of the source Manson. Cutting to scraping apparatus should be dug with the help of specific mark.
After the operation is done scraping, absolutely should not be touched and should be protected from adverse weather conditions. Manson is attached to the pipe clamp is secured with a system if necessary.
Manson is attached to the socket on the cables electrofusion on the source machine. Manson is entered on the barcode on the value of the machine. Then the welding process is performed by giving tension to the ends of the socket Manson. The implementation of the cooling process for the removal of the handcuffs is expected to be.
• Polyethylene pipe in the pipe laying operation on a more important issue than the quality of the workmanship. The welding control welder's certificate and be together again, especially important reference should be made.
The Advantages Of Mega-Therm Electrofusion
• By using this technique it is possible to obtain a direct output from the main pipe.
• The pipes are easy to repair.
• Very easily even in tight spaces is applied.
• Filling and excavation does not require too much.